Lorenzo Giannoccaro
Android ROMs

Lumia 1520

LineageOS 18.1, Android 11Test builds

The back of a yellow Lumia 1520
Latest build
15 November 2026
Android
11 (RQ3A.211001.001)
LineageOS
18.1, userdebug, test keys
Security patch
5 February 2024
Kernel
3.4.113, LineageOS msm8974
Chip
Snapdragon 800 (MSM8974)
Codename
bandit
SELinux
Permissive

The first Android builds for the Lumia 1520. The phone launched with Windows Phone 8 and never had an Android vendor, so the build starts from the Windows Phone boot manager through BootShim and lk1st, and runs the LineageOS msm8974 3.4 kernel adapted to the Windows Phone TrustZone, with the OnePlus One blobs and drivers written for the Lumia hardware.

The modem firmware comes from the stock image, where it is encrypted: the phone’s own TrustZone decrypts it at boot. LineageOS works without any Google apps. Treat these builds as experimental.

New in build 2026-11-15

  • Updated on 16 November with the same file name: if you downloaded it before, download it again and check SHA256SUMS.
  • CPU power collapse with the screen off: between wakeups the CPU cores, the L2 cache and the CPU power rail switch off, through the same firmware calls Windows uses. Measured with Wi-Fi on, the screen-off draw goes from about 146 to about 94 mA. A night in standby without a SIM used 39% of the battery in about 12 and a half hours.
  • Power saving with the screen off: the kernel gives back the clock and voltage votes the firmware leaves behind. Measured on the phone, the screen-off draw goes from about 525 to about 140 mA.
  • Qi wireless charging confirmed on the phone.

Status

  • Works
  • Not working yet
  • Needs testing

What works

Display and system

  • Boot through UEFI, BootShim and lk1st. With the installer 0.3.1 or newer, lk1st shows a fastboot menu on the screen
  • All four CPU cores
  • 1080p display with GPU acceleration, brightness and auto brightness
  • Touch, double tap to wake
  • Capacitive keys (back, home, recent apps) with backlight
  • Performance profiles in the Lumia settings app

Network and connections

  • Wi-Fi
  • Bluetooth
  • NFC (NXP PN544, with the antenna tuning of the stock firmware)
  • SIM, LTE data and SMS

Calls and sound

  • Outgoing calls
  • Loudspeaker (TI TAS2552 amplifier) and earpiece
  • Headset jack detection

Camera and video

  • Rear and front cameras: photos and video, autofocus, LED flash, upright preview and correct colours
  • Video playback with hardware decoding, YouTube at 1080p60 included

Sensors, storage and battery

  • Accelerometer, gyroscope, magnetometer, light, proximity
  • MicroSD, also as adoptable storage
  • Battery percentage and charging, also Qi wireless
  • USB ADB

Waiting for your reports

  • Microphone in calls: the earlier test turned out to be unreliable on these phones, so it needs a new one
  • Incoming calls
  • Calls and SMS with the 16 November update, not tested again yet
  • Battery life over long periods
  • Models other than the RM-937 (RM-938, RM-939, RM-940)

Not working yet

  • GPS: no satellite fix yet. The same software gets a fix on the Lumia 930, so an outdoor test on a 1520 comes next
  • No deep sleep on this firmware: the CPU now powers down between wakeups, but standby still drains the battery faster than on Windows
  • App transitions can stutter: frames arrive on time, the limit is the command-mode panel
  • Always-on display
  • SELinux is permissive

Install

A full install erases Windows and everything on the phone. Read the whole guide before you start. You flash at your own risk: there is no warranty, and going back to Windows means flashing a Windows image with WPinternals or Windows Device Recovery Tool.

With the installer (recommended)

The installer for Windows and Linux backs up the phone, copies the stock firmware, installs BootShim and lk1st on EFIESP, creates the Android partitions and then installs the ROM. It starts the Lumia 1520 TWRP in RAM and never writes it to the phone. Its guide describes every step.

You need:

  • A Lumia 1520 (RM-937, RM-938, RM-939 or RM-940)
  • WPinternals, for the bootloader unlock and the mass storage mode of a first install. It runs only on Windows, also if you then use the installer on Linux
  • A Windows 10 or 11 PC (64-bit) or a Linux PC. The Windows package brings its own Python; on Linux you need Python 3.8 or newer, util-linux and ntfs-3g
  • Android SDK Platform Tools (adb and fastboot). If they are missing, the installer offers to download them
  • On Windows, the Google USB driver
  • The battery above 50% and a good USB cable, plugged straight into the PC
  • To start Clean or Update from Android: USB debugging on
Installer modes
ModeStart fromWhat it does
Full Windows 10 Mobile or 8.1, unlocked with WPinternals and in mass storage mode Erases Windows. Backs up the phone first: keep that backup, it holds your phone’s calibration and the only exact copy of Windows. Then firmware, boot chain, Android partitions, provisioning and ROM. If it stops, run it again and it continues where it stopped.
Clean lk1st and the Android partitions already in place Installs the ROM and erases all Android data, internal storage included.
Update This ROM Installs the new build and keeps your data.
  1. Unlock the bootloader with WPinternals on a Windows PC, then switch the phone to mass storage mode.
  2. Download the installer and put the ROM zip with its SHA256SUMS in its rom folder. The installer downloads the TWRP by itself.
  3. Start installer.bat on Windows or ./installer.sh on Linux, pick Lumia 1520 and choose Full, Clean or Update.
  4. Follow the prompts. Every step that writes to the phone asks you to type a confirmation word, and every file is checked against its SHA-256 before it’s used.
  5. Wait for the first boot: it takes several minutes.

Manual installation

For a phone that already has lk1st and the Android partitions, for example after a Full install.

  1. Get to lk1st in fastboot: from Android run adb reboot bootloader, from TWRP choose Reboot > Bootloader.
  2. Boot the Lumia 1520 TWRP without flashing it:
    fastboot boot twrp-3.7.0_9-1-bandit.img
  3. First install only: Wipe > Format Data, then wipe Cache and Dalvik.
  4. Sideload the ROM from Advanced > ADB Sideload. The transfer stopping around 47% is normal.
    adb sideload lineage-18.1-20261114-UNOFFICIAL-bandit.zip
  5. Reboot.

Updating

Run the installer in Update mode, or boot the TWRP again (step 2 above) and sideload the new zip without wiping data.

Keys or gestures

The three capacitive keys work by default. To use gestures, turn on the on-screen navigation bar in Settings > System > Buttons: the keys and their backlight turn off. Then pick Gesture navigation in Settings > System > Gestures > System navigation.

If it bootloops

If adb still sees the phone, run the installer in Update or Clean mode: it stops the loop with adb reboot bootloader. Otherwise get to lk1st, boot the TWRP with fastboot boot and sideload the ROM again. Volume up at power-on always opens the flash mode, the way back with WPinternals.

Downloads

Hardware

Chip
Qualcomm Snapdragon 800 (MSM8974), four Krait 400 cores at 2.2 GHz
Graphics
Adreno 330
Memory
2 GB RAM
Storage
16 or 32 GB, microSD slot
Display
6 inch IPS LCD, 1080 × 1920, 368 ppi
Rear camera
20 MP PureView, 1/2.5 inch sensor, f/2.4, optical image stabilisation, dual LED flash
Front camera
1.2 MP, 720p video
Battery
3400 mAh, not removable, Qi wireless charging
Connections
LTE, Wi-Fi 802.11ac, Bluetooth 4.0, NFC, micro USB
Models
RM-937, RM-938, RM-939, RM-940. The builds are tested on an RM-937

From Nokia’s specifications (archived copy) and Wikipedia.

Sources

Credits

This port stands on the work of many people. Thank you all.

  • KorelisLabs: lumia-1520-mainline (boot chain, device tree, TrustZone quirks, hardware addresses, APDS-9930).
  • Markynose (Mark Buchok): lumia930-linux (SMP through the UEFI mailbox, which the power collapse also uses to resume, touch, graphics).
  • imbushuo: BootShim.
  • msm8916-mainline: lk2nd (lk1st).
  • René Lergner (HeathCliff): WPinternals; AkariRiku and joaozittoo: the RM-1085 donor files.
  • WOA-Project and the Legacy Portable Computing Wiki: unlock guides.
  • Android4Lumia950 (djokcho, EpicLPer, j0sh1x, sonic011gamer and the community): the Lumia Android installer used as the model for the boot chain and partition layout, and the 950 XL work reused here (modem bring-up, UIM bootstrap).
  • msm8974-mainline and postmarketOS.
  • LineageOS and TheMuppets: the msm8974 kernel, the OnePlus One (bacon) and msm8974-common trees and blobs, the legacy NXP NFC stack.
  • NXP (Sylvain Fonteneau): the Android PN544 kernel driver.
  • TeamWin: TWRP.
  • The mainline Linux authors of the tsl2772, ak8974 (HSCDTD008A) and TAS2552 drivers, used as references; STMicroelectronics: the lis3dh_acc driver used as a model.